Animal welfare requires a reliable baseline that allows management to identify deviations and evaluate the effectiveness of corrective actions. While institutional commitments guide conduct, production-related decisions must be grounded in observable evidence collected using standardized criteria across all stages: catching, loading, transport, receiving, and slaughter. Without an individual assessment of each of these phases, a final indicator might signal a loss but fail to precisely reveal where it occurred or what caused it.
GTF presents the PAACO Animal Welfare certification as recognition of responsible practices and respect for animals throughout all stages of poultry production. The company also selects and trains its integrated partners, providing the information necessary to meet established criteria.
This commitment must extend throughout the entire production chain. In this context, animal welfare indicators serve as essential tools for verifying compliance with criteria, comparing results, identifying deviations, and guiding improvement initiatives in both the field and the processing plant.
How can animal welfare be monitored?
Animal welfare indicators must be recorded by flock, date, origin, team, vehicle, route, shift, and relevant operational conditions. This level of detail makes it possible to distinguish an isolated fluctuation from a recurring pattern. It also prevents attributing a problem that originated at the poultry farm to the slaughterhouse, or holding transport responsible for an injury linked to the catching process.
A baseline must compile results from a representative period, using consistent definitions for each data point. The mortality rate, for example, must specify the denominator used—typically the total number of birds loaded—and the time of counting. Similarly, injury incidence requires classifying the type of injury, its location, and the inspection stage.
To ensure the data is useful, the technical manager can organize records into comparable groups:
Origin data, including age, average weight, stocking density, health history, and fasting time;
Catching and loading data, such as time, team, handling method, crate or module stocking density, and waiting time;
Transport data, covering duration, route, weather, ventilation, stops, and vehicle condition;
Reception and slaughter data, including waiting time, physical integrity, stunning, and observed non-conformities.
Furthermore, the indicator does not replace technical observation. A spreadsheet shows that a change occurred, whereas field inspections, discussions with teams, and process reviews clarify the mechanism behind it. Combining these approaches reduces hasty interpretations and improves the prioritization of corrective actions.
Animal welfare controls and monitoring activities must be recorded in detail, taking into account information such as flock, date, bird origin, the team responsible for catching, transport vehicle conditions, route duration, shift, and relevant operational conditions. This level of detail allows for distinguishing an isolated incident from a recurring problem. It also helps identify the stage where the deviation originated, avoiding, for example, attributing a problem that began at the poultry farm to the slaughterhouse, or holding the transport operation responsible for an injury caused during catching.
To facilitate the analysis and comparison of results, the person responsible for monitoring records the following information:
Source data: bird age, average weight, stocking density, health history, and fasting duration;
Catching and loading data: time, responsible catching team, handling method, number of birds per crate, and waiting time;
Transport data: trip duration, route, weather conditions, ventilation, stops made, and the condition of crates and vehicles;
Reception and slaughter data: waiting time, physical integrity of the birds, shackling, and the efficiency of stunning and bleeding.
Alongside on-site monitoring, dialogue with the teams involved and process reviews help to understand any deviations that may occur. Combining recorded data with technical observation reduces misinterpretations, facilitates root cause identification, and enables the definition of the most appropriate and high-priority corrective actions.
What does the transport mortality rate reveal?
The transport mortality rate indicates the proportion of birds arriving dead at the slaughterhouse relative to the number loaded. It is a key indicator of process integrity, although it does not identify the root cause of the problem on its own. An increase in this rate should trigger an immediate investigation and a comparison against the operation's baseline.
The first step is to stratify the results. Variations may be concentrated in flocks from a specific origin, long-haul trips, specific times of day, a particular vehicle, or specific weather conditions. Therefore, relying solely on the monthly average can mask significant operational failures on a specific route or shift.
The transport mortality rate represents the proportion of birds arriving dead at the slaughterhouse relative to the total number of birds loaded. This indicator is crucial for assessing the integrity of the transport process, even though it cannot determine the cause of mortality in isolation. When the rate rises, it is essential to launch an immediate investigation and compare the result with the operation's established baseline.
The first step is to break down the data based on factors that might be linked to the issue. Increased mortality may be concentrated in flocks from a specific source, longer trips, specific times, particular vehicles or routes, or adverse weather conditions.
For this reason, analyzing only the monthly average can obscure significant operational failures. Even when the overall result falls within established limits, a specific route, shift, or vehicle might show high rates. A detailed data analysis allows for more precise identification of the deviation, investigation of potential causes, and more effective targeting of corrective actions.
Factors to investigate in the presence of an abnormality
Changes in transport mortality rates should prompt a review of pre-loading handling, transit conditions, and receiving procedures. Excessive heat or cold, inadequate ventilation, and transport delays increase the thermal stress load. However, these factors must be evaluated in conjunction with the birds' condition and catching practices.
Fasting duration and access to water prior to catching;
Crate stocking density appropriate for bird weight and environmental conditions;
Handling, restraint, and placement of birds into transport crates;
Time elapsed between the end of loading and unloading, including queues, stops (traffic congestion), and route deviations;
Ventilation, weather protection, vehicle maintenance, and equipment functionality;
Conditions in the receiving area, such as shade, air circulation, and duration of stay.
A higher mortality rate does not, in itself, justify the conclusion that a failure occurred at only one link in the chain. For example, a short journey can yield poor results if the waiting time after loading is excessive and coincides with high temperatures. Investigations must reconstruct the operational sequence, document evidence, and determine which causes are controllable.
How do injuries and stunning assess the slaughter process?
Stunning efficiency is a factor in meat quality assessment. This indicator highlights risks to the birds' physical integrity and their experience prior to bleeding. However, interpreting the data requires specific classification criteria and an understanding of the link to preceding stages.
Incidence refers to the proportion of birds exhibiting a specific condition within a sampled group or flock. Wing injuries may be associated with catching, loading, transport, unloading, handling during shackling, and pre-shock events upon entering the stunning bath. Breast injuries, meanwhile, may require an analysis of the litter conditions in the poultry house where the birds were kept; they may also be linked to equipment design, physical contact during transport, and compression against equipment surfaces.
Inspect, classify, and list the incidents.
The team must be able to distinguish between recent and old injuries and identify their likely causes. Standardized photographs, assessor training, and consistent sampling enhance the reliability of the classification. Consequently, incidence data moves beyond subjective impressions to support comparisons between flocks, teams, and shifts.
Effective stunning confirms that the applied method induced unconsciousness prior to subsequent processing stages. Operational controls must monitor the system's parameters, equipment settings, bird positioning, water level in the immersion bath, line speed, and the signs of consciousness defined in technical protocols.
It is important to note that a successful stunning outcome does not compensate for prior injuries or failures. Animal welfare extends beyond the point of slaughter. Analysis must ensure that positive data at one station does not mask issues occurring during loading, transport, or bird reception.
What is the role of internal and external audits?
Internal and external audits evaluate the Units by verifying whether collection methods, procedures, and corrective actions align with established criteria. They transform figures into verifiable evidence.
An effective audit compares records against observed practices. It may review training records, vehicle and equipment maintenance, mortality logs, fasting periods, cage conditions, and handling procedures. It must also objectively document non-conformities, identifying the unmet requirement, the evidence found, the associated risk, and the person responsible for addressing the issue.
External audits bring independence to the assessment, whereas internal audits facilitate greater frequency and close monitoring; thus, the two formats serve complementary roles. Animal welfare certifications signal a recognized commitment but do not eliminate the need for continuous measurement, process auditing, and the remediation of every identified deviation.
How can indicators be converted into verifiable corrective actions?
Animal welfare data only leads to improvement if converted into corrective actions with a defined root cause, assigned responsibility, a timeframe, and verification criteria. A monthly meeting reviewing aggregated figures is insufficient.
The management cycle must include recording the non-conformity, analyzing its cause, implementing corrective action, and verifying results through a follow-up measurement. If the indicator shows no improvement, it is necessary to re-evaluate the initially identified cause and investigate other contributing factors. This process prevents generic measures—such as simply reiterating guidelines to the team—without verifying whether the operational root cause has actually been brought under control.
Consistent measurement, interpretation, and correction help safeguard animal welfare and strengthen process control. Indicators such as mortality rates, injury incidence, and stunning efficiency should not be evaluated in isolation or replace technical analysis. When interpreted collectively—and considering every stage of the production chain—they provide concrete information to guide decisions, direct partner actions, and drive continuous improvement in animal welfare.


